Twilight Zone repro pf 
38
Wood tones are masked and sprayed.Fine line is used to make the missing edges on the bleed over side.
 Once the color was sprayed I could then see the clear runs that were going through the switch cut outs.If this doesn't help show that the clear was  poured on/over applied nothing does. I will now  get into the  switch cut outs and sand the  runs out.
38
Wood tones are masked and sprayed.Fine line is used to make the missing edges on the bleed over side.
Once the color was sprayed I could then see the clear runs that were going through the switch cut outs.If this doesn't help show that the clear was poured on/over applied nothing does. I will now get into the switch cut outs and sand the runs out.
Viewed: 370 times.

39
 While sanding the runs out I  had some clear just chip right off.The area is so thick  that  feathering it in isn't an option it will require filler.
39
While sanding the runs out I had some clear just chip right off.The area is so thick that feathering it in isn't an option it will require filler.
Viewed: 386 times.

40
Chip is being repaired.
40
Chip is being repaired.
Viewed: 435 times.

41
Chip is repaired and the repaints can continue.Unfortunately transparency in these cut outs is pretty much ruled out.
41
Chip is repaired and the repaints can continue.Unfortunately transparency in these cut outs is pretty much ruled out.
Viewed: 417 times.

42
Cut out refinished.
42
Cut out refinished.
Viewed: 384 times.

43
Uppers were done as well.
43
Uppers were done as well.
Viewed: 386 times.

44
Uppers unmasked.
44
Uppers unmasked.
Viewed: 385 times.

45
Lowers umasked.
45
Lowers umasked.
Viewed: 373 times.

46
The following pics will help better highlight all the break throughs in the  clear from the leveling process.
46
The following pics will help better highlight all the break throughs in the clear from the leveling process.
Viewed: 410 times.

Powered by Gallery v1 RSS