41 Cabinet is being stripped to bare wood.
42 Ready for repairs.
43 Repairs to the lower are complete.
44 The head is ready to repair.The back panel has a hole in it.Since it is made of mdf it cannot be repaired as well as I woul
45 Rear panel has been removed.
46 I have cut and drilled a section of plywood to replace the rear panel.
47 Rear panel is in place and t the head has been re-squared.
48 Once the glue dries the head will be ready to begin the normal repair process on.
49 Head is ready to begin repairs.
50 Head stripped to bare wood as needed.
51 Repairs in process.
52 Head is ready to prime.
53 Head is primed.
54
55 Lower repairs complete.
56 Lower taped off ready to prime.
57 Lower primed.
58 After primer sets up I will sand and paint the cabinet.
59 Head is guide coated ready to sand.
60 Head sanded.
61 Head refinished.
62
63 Lower ready to sand.
64 Lower sanded.
65 Lower refinished.
66
67 Warning text is screened on the head.
68
69
70
71
72 Head is ready to ground braid.
73 The floor has been routed.
74 The speaker cut out is now large enough forthe sub woofer upgrade.
75 Floor is sanded clean underneath.
76 Ground braid is run. Cabinet will be ready to decal next.
77 Decals installed.
78
79 Decals are finished out and the lower is on legs.
80