1
I have done couple TOMs but never documented it so this will be the first.
Starting platform is pretty decent overall.
|
2
|
3
|
4
|
5
|
6
|
7
Typical insert bordering is present in the lower portion of the playfield.I *should* be able to match these colors well eno
|
8
Shooter lane is solid and should sand up pretty well.
|
9
Light corrosion is present.
|
10
Inside is average.
|
11
|
12
|
13
|
14
Light corrosion and dirt is to be expected at this point.
|
15
Not much care was used when installing the labels.
|
16
The bracket has been welded together at some point.
|
17
Teardown begins.
|
18
|
19
|
20
|
21
|
22
|
23
Playfield is out.
|
24
Playfield stripped bare underside.
|
25
Stripped bare topside.
|
26
Shooter lane is decent should sand up nicely.
|
27
There is some typical insert bordering in the lower area.The solutions will be to clean it as well as possible and eliminat
|
28
Some chipping behind a target.
|
29
Basement hole is not bad.
|
30
All coils will be polished and rebuilt.
|
31
The previously welded bracket will be replaced.
|
32
Replacement bracket installed during the rebuild.
|
33
Coil brackets and hardware are prepped for rebuild.
|
34
Cabinet is gutted.
|
35
Playfield is ready to prep for restore.
|
36
This is the worst part because the insert bordering is pretty bad in the lighter color then the location being so visi
|
37
Playield is prepped for repaints.
|
38
Shooter lane sanded up pretty clean.The routing is deep and the dirt is heavily worked into those grooves so there may be
|
39
Ready to do the lighter color of the insert bordered areas.
|
40
Lighter color was done.The darker is being blended in.
|