1
Decent looking TZ.
|
2
|
3
|
4
Playfield isn't bad.No shine left but that is normal for a 16 year old game.
|
5
|
6
|
7
|
8
Ball drop is still holding up.
|
9
Shooter lane has a mild surface crack.That was probably there from day one but now the dirt has been ground in and is highli
|
10
Inside is average.
|
11
Underside is a bit dirty.
|
12
|
13
|
14
Mild corrosion on the metal.
|
15
Underside teardown in process.
|
16
Parts are ready for cleaining and organization.
|
17
Topside teardown.
|
18
Playfield is out of the cabinet.
|
19
Playfield stripped bare topside.
|
20
Playfield stripped bare underside.
|
21
Cabinet is ready for further teardown.
|
22
|
23
|
24
I am ready to prep the playfield forthe initial clear.
|
25
Mylar sections are removed the playfield is cleaned.
|
26
Playfield has been lightly sanded.I am about to drill for the third magnet.
|
27
Playfield drilled.
|
28
I have roughed in the wood tone and border.That might need a little finesse after it clears and levels but for now it is
|
29
Shooter lane has been sanded clean.Playfield is ready for the first clear application.
|
30
Initial clear applied.
|
31
Coils assemblies have all been polished and rebuilt.
|
32
Playfield ready to begin the next phase of level and repair.
|
33
Sanded.
|
34
I am going to spray an over thinned wood tone to hide the cracking and discoloration/ground in dirt of the switch cut ou
|
35
Sprayed.
|
36
Unmasked.
|
37
One severely raised insert has been leveled and repaired.That insert is the power ball insert to the right.
|
38
Ready to clear.
I normally try to keep it to a two coat process but this one will likely benefit from one more sanding a
|
39
Cleared.
|
40
Cracking and other issues are taken care of.
|