37
Ready for the first coat of clear.There will be other repairs done after that.
|
38
First clear applied.
|
39
Close up of the added magnet hole.
|
40
Ready to sand and begin the repairs/repaints.
|
41
Sanded.
|
42
The gumball exit needs some work.
|
43
Filled and shaped.
|
44
The wood tones are being refreshed as needed.Only a couple spots really need it but in order to keep it uniform many more
|
45
A very thin overthinned coat is put down.It won't completely bury the natural grain but it does mute it a bit.
|
46
Wood tones unmasked.
|
47
Gumball exit.
|
48
Next is all the black borders on the lower inserts and a few others that are showing wear as well.
|
49
Unmasked.
|
50
About ready to clear again.
|
51
Cleared for a second time.Considering the amount of repaints this may need one more sand and clear there good chance it ma
|
52
New lower cab.
|
53
Prepped for primer.
|
54
The existing head was in good shape so that will be stripped ad refinished.
|
55
Minor repairs are being made to the new lower and existing head.
|
56
Cabinet prep and repair complete.
|
57
Cabinet primed.
|
58
Guide coated.
|
59
Sanded and trimmed out.
|
60
Refinished in the base color.
|
61
Now that the cabinet is in order and the playfield is fully cured I will begin the rebuild.
|
62
|
63
Through parts installed.
|
64
|
65
|
66
Third magnet install.
|
67
New manets installed.
|
68
The piggy back that was driving the first version of the 3rd magnet has been removed and the solder points re flowed.Rein
|
69
Reinforced slot target installed.
|
70
Switch harness lamp boards and rebuilt flippers are in place.
|
71
Decals applied.I am catching the cabinet up with the playfield.
|
72
Decals are finished out.
|
73
Edges are done now full reassembly can begin.
|
74
|
75
Back on legs.
|
76
Cabinet rebuild complete.Wired.
|