1
Starting out with your typical IJ.Faded.
|
2
|
3
Faded moe to the front on this side.
|
4
Playfield looks pretty good has great potential.
|
5
|
6
|
7
|
8
|
9
Translite is a bit rough.I don't see anything that can't be improved but it is not perfect.
|
10
Baords are all there and dirty.
|
11
It had a driver board swapped at some point I should have the correct -3 board to swap with.The -1(cubed flipper relay)is
|
12
Underside is average.A bit dirty light corrosion nothing out of the norm with the a exception of the flipper mechs.
|
13
|
14
|
15
Counter in the floor.Easy thing to get rid of.
|
16
|
17
|
18
Flipper mechs have old style kits and EOS capacitors.That will all be redone and corrected during the restore.
|
19
Teardown begins.
|
20
Topside is well into teardown.
|
21
|
22
|
23
Head is almost gutted.All boards will be cleaned and serviced.
|
24
All wiring harnesses have been removed one at time.
|
25
Cabinet has been emptied.
|
26
Head and lower are separated.
|
27
Most parts removed have been cleaned /rebuilt and bagged.Not all though.
|
28
Playfield stripped underside.
|
29
Playfield stripped topside.
This is a very nice playfield with only a few issues.
|
30
Typical insert bordering and just a touch of ghosting on a couple insert edges.
|
31
Mode and lock hole are in good shape should sand up nicely without fill in or repaint.The drop target hole will need some
|
32
Mylar sections have been removed and the playfield is being prepped for an initial coat of clear.
|
33
First clear applied.
|
34
Sanded and ready for repaints.
|
35
The only real issue with the playfield at this point is the insert wear on the larger inserts.Those have been masked and
|
36
Sprayed.
|
37
Unmasked.Ready to clear.
|
38
Insert repairs turned out well.
|
39
Final clear applied.
|
40
Shooter lane looks good.
|