123
I rarely deal with cash boxes but in this case I decided to keep this one since it was a true original with the W logo.
|
124
Now I can prep,restore,clean etc all the cabinet parts that were not plated.
First I will do the lower.
|
125
Lower gutted.
|
126
I will need to break all this stuff down,and rebuild it one section at a time.
|
127
First assembly I will do is the tilt and bell set up.
|
128
All parts were hand polished.The tilt bob is brass.I did not know that at first.
|
129
Bell was taken apart and polished.
|
130
the wooden panel was refinished.I will reassmble all this once in the cabinet since I need to ground braid over it first.
|
131
The transformer panel is next to be done.
|
132
The panel was taken all the way apart and repainted all parts were cleaned and it is now being reassembled.
|
133
Transformer panel is done.A new fuse holder and cord were installed during the process.
|
134
the head is also being rebuilt.
|
135
All the tin inside is brand new.
All boards are at COC being serviced.
|
136
New rails are being fitted.
|
137
Internal rebuild of the lower in process.
|
138
New style reinforced leg plates are used to give a stronger footprint at the mount and strengthen the corners.
|
139
|
140
|
141
Almost ready to set the head on.
|
142
The coin door needs some work.A new one would be nice but I will be able to get this one preety straight and regrained.H
|
143
Coin door torn down.
|
144
Skin is ready to rework.
|
145
Skin has been straightened and regrained.
|
146
All other parts were cleaned and polished as needed the return slot flap was bead blasted to remove all the rust.
|
147
Coin door is installed.
|
148
Cabinet wiring is complete as is the majority of the hardware install. Most of the interior parts like the glass channel,
|
149
|
150
|
151
Head is on the lower.
|
152
New flipper button and legs are installed.
|
153
|
154
|
155
|
156
|
157
|
158
That pretty much closes the cabinet out until the boards arrive and the playfield is ready to drop in.
|
159
Rebuilding the lamp panel is next.
|
160
Old displays removed.The panel will be refinished and all metal parts will be cleaned and polished..
|
161
New pinscore controller installed on the back side.
|
162
Panel refinished and reassembled with all new bulbs and displays.
|