76
|
77
I can't quite get a true dithering but I think I came pretty close this time around.It took a combination of what I have d
|
78
Cleared for the final time I promise.
|
79
Looks pretty good.I am happy with it overall and I thought it was important to get it as close as I could since this is a
|
80
Alright alright one more time I have the thing like 85% and I can see a couple minor touches that I could do to get it c
|
81
Looking at the original pics I was missing just a little detail at the end to fade it into the other parts of the web and
|
82
Cleared for the ..I don't know but most of it has been shaved down along the way so it is not thick it just been a proces
|
83
That is it.Moving on.
|
84
Upper playfield sanded ready to polish.
|
85
Upper playfield polished.
|
86
Upper playfield ready to rebuild.
|
87
Rebuild is in process.I have had to do some serious hand polishing on these parts because the level of rust and corrosio
|
88
The bumper runs a strange cut on the Mylar plater.These do not stick down they just kind of float.
|
89
New platter is cut.
|
90
Top side is rebuilt about as far as it goes until I wire the underside.
|
91
|
92
I am having plastics made so that will be a while.but the top is almost complete less that.
|
93
Starting on the underside.I have refinished the gray.
|
94
The harness is in place but the coils and assemblies will be added one by one as I polish and rebuild them.
|
95
One flipper is rebuilt with a new factory correct coil.The jet bumper was rebuilt as well.It did not need a new coil sinc
|
96
Getting closer.
|
97
Flippers to be rebuilt.
|
98
Target to be rebuilt.
|
99
Flippers rebuilt and in place.
|
100
All other parts were polished as well as possible and rebuilt prior to install.
|
101
The upper track was plated to eliminate the rust and corrosion.
|
102
That is everything less the plastics which are out being recreated.The upper is official done.
|
103
Upper is boxed up and wrapped to keep it safe and dust free.I can now move onto the next phase.Hopefully that will o a litt
|
104
I am starting on teardown of the main playfield now.
|
105
Plastics removed.
|
106
Most of the topside parts are removed.
|
107
|
108
Playfield is out of the cabinet and ready to teardown.
|
109
Wiring and assemblies are removed.
|
110
All coils will be rebuilt.
|
111
Wiring is being cleaned up as well as possible.I have to be very careful since I don't have manuals or documentation to fa
|
112
Underside stripped complete.
|
113
Window is removed.What is interesting to me is that it is just a clear window.
|
114
The actual effect of reducing the lower playfield is done with this rubber like film.
|
115
Playfield teardown is complete.The repaint is going to be a big job.
|