1
Starting out with a typical FH cabinet wise.
|
2
The head is quite beat and has some mild moisture issues.
|
3
Front is drilled on both sides and heavily wrinkled around the legs and coin door area.
|
4
|
5
|
6
Playfield and most of the playfield appearance parts are completely trashed.
|
7
The apron will require refinishing.
|
8
Pretty much all plastics are broken.
|
9
The playfield is one of the rougher I have seen on FH.
|
10
More paint loss.
|
11
Lots of rigged parts.Blown out targets etc.
|
12
The ramps are completely wasted.The lamp shade is missing but it will not be a big deal to replace it and the asociated p
|
13
The trap door is rigged as well.
|
14
The worst thing is that the back half of Rudy's head is melted.I will either heat and reshape if possible or replace wi
|
15
Inside is typical.Mainly just dirty and lightly corroded.
|
16
|
17
|
18
Underside of the playfield is about as rough as the top but mostly complete.
|
19
Basically the game needs everything but that i usually the case on these anyway it is just that it is not at all optional t
|
20
Translite is decent.It should clean and touch up well.Has a scuff at the lamp panle latch.Very common on most WPC games.
|
21
Teardown begins.
|
22
The board set is complete .No corrosion on the CPU so that is a good sign.Usually games in this condition will have or hav
|
23
Head gutted.
|
24
Playfield teardown in progress.
|
25
Ruddy head is in rough shape mechanically as well.Nothing that can't be taken care of just a bit worse than the norm.Here
|
26
For some reason there is a plate under the ramp.Not really an issue since the game will get new ramps and a new playfield.
|
27
|
28
|
29
|
30
Underside nearly stripped complete.One subborn flipper assembly left.
|
31
Playfield is out.Head is off lower.
|
32
Old playfield.
|
33
The head is pretty much junk because with the moisture damage and the numerous dents and dings it is also separated at the
|
34
New playfield will need to be drilled and dimpled before clearcoating.
|
35
This is just a good area to highlight the amount of holes that are missing.
|
36
This is the area once drilled just using this section as an example but it is like his through out the entire playfield.I
|
37
|
38
The underside is blank as well so that will need to be dimpled/predrilled for all the underside components.
|
39
I will use this area to highlight the process/results.
As made.
|
40
Now predrilled/dimpled.
|