81
82 Head is refinished.Gloss will die down to the correct level once fully cured.
83
84 Lower refinished.
85 Head is fully cured and dried to the proper gloss.
86 Warning text is screened.
87 Playfield is ready to sand and do what I hope are the final repaints.
88 Sanded.
89 I am going to get this area in shape as well as I possibly can.I decided not to use full insert decals because I found t
90 Border work is done.
91 Unmasked.
92 Ready to clear.
93 Cleared and focusing on the insert repairs.While not perfect these are much improved and should not attract attention fro
94 This area was further perfected during this final round of repaints.One or two compromises had to be made but I think the
95 This should be it.After a few days cure it will be ready to sand polish and begin rebuild.
96 Rebuilding the coil assemblies will be the next step.
97 Replacing the basement bracket .
98 New bracket.
99 Basement assembly rebuilt with a correct coil and all new sleeves in addition to the new bracket.
100 The rest of the coils are being addressed now.
101
102 Torndown and all parts polished.
103 Flippers rebuilt with correct kits and coils.
104 Other coils rebuilt with all new sleeves and hardware.
105 Cabinet is being rebuilt and prepped for decals.
106 New reinforced leg plates and ground braid.
107 Head is ready.
108 Cabinet is ready to decal.
109 Decals are applied.
110
111 Edges will be finished out next and then the reassembly will continue.
112 Edges are finished.
113 Correct alignment and color used.
114 Rails are installed.Head is on lower.
115 Wiring complete.
116
117
118
119 Playfield repaired underside and sanded clean as possible.
120 Through parts installed.