41
Cleared.
|
42
Shooter lane is looking much better now .
|
43
Trash is gone.
|
44
Grain is gone for now.It may or may not come back through as it cures depending on how well they sealed it prior to screeni
|
45
Ready to install shaker motor.
|
46
Shaker motor installed.
|
47
Playfield is sanded and being prepped for a final coat of clear.
|
48
Ready to clear.
|
49
Final clear applied.
|
50
|
51
|
52
|
53
This should finish eliminating the grain.If not then it will be much less noticeable.
|
54
Clear is fully cured and has been sanded for final polishing.
|
55
Playfield is polished.
|
56
|
57
Grain is eliminated for the most part and hopefully it will remain that way.Long term it could draw in just a little but
|
58
|
59
|
60
After a thorough clean p from compounding it will begin reassembly.
|
61
Underside t nutted.
|
62
Topside t nutted.
|
63
Through parts are being installed.
|
64
|
65
|
66
Going with yellow post.I may change that but for now I am trying it out.
|
67
Clify protectors installed.
|
68
|
69
Update post installed.
|
70
I will remove the bare metal hardware on the rails and metal etch them in black for a cleaner look.r
|
71
Metal etched.
|
72
Ready to rebuild the underside.The wiring was not as heavily broke down on this game since everything was new so it will n
|
73
Flipper coils are being upgraded to the stronger version offered by Pinball Life.They are noticeable larger.ne note is that
|
74
Underside rebuild nearly complete.I will neaten it up later.
|
75
Plated resting brackets installed.Done in nickel.
|
76
Playfield back in cabinet.
|
77
|
78
|
79
|
80
Powered up for testing.
|