1
Game looks okay at first glance.
|
2
Looking a little closer the waning text is painted over in he back and signs of moisture damage are present.
|
3
Under the head decals are runs,wood grain and poor repairs.
|
4
Already peeling at the legs.
|
5
Looking under the decal shows why.Very poor prep was done prior to installing the decals.These decals in particular seem l
|
6
Same problems on the other side.
|
7
Peeling the decals off highlights two different problems.One problem was with the install but the other problem is from the
|
8
Head is now set up and the rest of the evaluation follows.
|
9
|
10
Playfield itself looks quite workable.The associated parts will need replacement,repair and rebuild accordingly.
|
11
The castle drawbridge is hammered.The way it is resting so far into the castle itself tells me there are mechanical proble
|
12
No decals on the troll flaps.Not a big deal but worth note.
|
13
Apron looks fine and should restore well.
|
14
Shooter lane will sand up nicely.The wrong switch blade is being used in the lane so that will be addressed during the r
|
15
The wireforms have been painted with gold paint instead of properly plated.That will not be a big deal to overcome since
|
16
The sockets were painted as well so those will be replaced.
|
17
Underside shows many signs of poor mechanics and moisture exposure.
|
18
|
19
Rust and corrosion are present on all metal.Some things show i more than others like the flipper board spring steel is alm
|
20
|
21
Minor things like the missing rubber on the botom of the left troll assembly are obvious.
|
22
Things like the welded troll carriages take a little more effort to notice.
|
23
This helps highlight the rust and corrosion present on the underside playfield components.
|
24
Resting brackets are showing the signs as well.
|
25
|
26
Teardown begins.
|
27
Wiring removed one harness at a time.
|
28
Harnesses and most assemblies are removed from the underside.
|
29
|
30
Topside teardown in process.
|
31
Topside is almost stripped complete.
|
32
Playfield stripped and out of the cabinet.
|
33
|
34
Shooter lane will sand up nicely but needs help right now.
|
35
|
36
Typical moat kickout wear to be addressed.
|
37
Underside stripped bare as well even the t nuts are removed.
|
38
Cabinet teardown in process.
|
39
|
40
Nice welded leg plate :-)They probably spent more welding than it cost to replace it.
|