41
The head is a bit out of square so it will need some structural repair.
|
42
The corner is loose so this is likely why it is out of square and not very solid.
|
43
The back is removed in order to re-square the head.
|
44
The rear panel is fine so after some prep and repair it will be reinstalled.
|
45
Head is squared and the panel is back in place with glue and a few hidden finish nails so after an overnight cure it wil
|
46
Cabinet front has also been re-squared and reglued.As with the head it will need to dry over night before starting the
|
47
Repairs are now being made.
|
48
The seam in the back of the head is being worked since it was removed.
|
49
The face is being smoothed in as well.
|
50
Repairs are complete for the time being.At this point I need to seal the cabinet before continuing the repair process.I nee
|
51
Cabinet is treated with adhesion promoter and cleared.Hard to tell in the pics.
|
52
|
53
Head cleared.
|
54
A better shot to show the clear.After it cures a couple days I can sand it and begin the repaints.Should be the black pri
|
55
Cabinet i sanded and ready to begin refinishing.
|
56
After a full 8 hours of masking the cabinet and head are ready to spray black.
|
57
Black applied.
|
58
|
59
|
60
Head unmasked.
|
61
|
62
Lower unmasked.The yellow on this side will need some rework as well.
|
63
|
64
Looking pretty good already.
|
65
I am almost ready to start on the next color.
|
66
Yellow is now masked and sprayed. Left side.
|
67
Yellow refinished on the right side as well as the front.
|
68
The dagger needs to be reworked as well since one was faded.
|
69
Both are being done to keep it uniform.
|
70
Carefully done to retain as much of a dithered screened look as possible.
|
71
Unmasked.This was the faded one the other looks identical now as well..
|
72
Ready to clear once more.
|
73
|
74
|
75
Clear applied to the head.
|
76
Lowered cleared.
|
77
|
78
After a couple days cure it will be sanded once more the final details will be taken care of and it will be cleared for a f
|
79
Cured and ready to sand.After this it will get the final repaints and matte clear.
|
80
Sanded once again.
|