47
48 Have a NOS ramp for this game.Unfortunately it must differ from the proto(don't have that one).The plugs don't match.
49 Here is what was left of the Proto bones.Not enough to do the ramp obviously.
50 Luckily I do have a couple sets of the IPB glow in the dark kits so it will at least be as functional as the orginal proto
51 Glowing bones installed.
52 The next unexpected problem I have run into is that the game does not have a harness or tap for the Crate LED board.Odd tha
53 Luckily I do have some old harnesses and the EOS plug is a great match after I reconfigure a couple things.
54 Using a factory manual I was able to trace the drive wires for each set of LEDs.
55 I have tapped them as documented.
56 It works.
57 Have the same issue with the ramp optos.No plug or at least no plug that matches.Not just from the Molex housing standpoint
58 I have traced the proper wires and tapped them.
59 Found another plug that doesn't match up with the wiring harness or software.This one goes to the gate.It plugs into a flas
60 I have found the correct drives and will be installing the right plug.
61 Game is wrapping up.
62
63
64
65
66