1
Unpacking.
|
2
Moisture damage is pretty obvious on the back of the head.
|
3
The back of the cabinet shows signs of damage as well.
|
4
The front is very rough even though it has been previously decaled..
|
5
The decals look to be homemade and very inaccurate.
|
6
The door is green ;-)
|
7
Playfield is a bit rough but not really worn so much.
|
8
Some mods have been done previously like the blue clock housing and some other add ons.
|
9
|
10
|
11
The inserts are the biggest issue on this playfield.Several are sunk and chipping and or chipped.Others are starting to gh
|
12
More of the same insert issues up top.
|
13
Typical splintering at the switch cut out/ball drop.
|
14
Shooter lane will need some work because it is chipping and has a bit of wood loss.Hopefully it can be sanded without th
|
15
Inside is on par with the exterior.Moisture damage and swollen wood hidden by a black coat of paint that is sprayed not o
|
16
Wiring is hacked in a couple spots.No wiring at all going to the Buy in button so I am sure continuing games was not an op
|
17
Leg plates have had nuts welded on.
|
18
Playfield underside is dirty, heavily gone over(not very well)and has some corrosion.
|
19
|
20
|
21
|
22
Translite should clean and touch up just fine .The main concern and/or unknown will be how the removal of the tape around
|
23
The back panel does not appear to have any moisture issues.It is in need of some work.
|
24
the boards are a mix of original and ones from other games judging the serial tag numbers and style.The driver in particul
|
25
Tear down in process.All boards removed from he head.
|
26
The driver is VERY rough.
|
27
Lots of repair was done .None of it looks good.There are incorrect caps,jumpers,silicone and bad soldering.
All will be t
|
28
The backside of the board is more of the same.
|
29
Underside teardown in process.
|
30
Opto,solenoid,and lamp harnesses have been removed.
|
31
Underside is nearly stripped complete.
|
32
I am guessing they were having a hard time with this :-)
|
33
Topside tear down continues.
|
34
Topside teardown nearly complete.
|
35
Playfield is out of the cabinet and stripped bare underside.
|
36
Topside is stripped and wiped down.
|
37
Close up of the shooter lane now that it is a bit cleaner.
|
38
Ball drop and insert issues.
|
39
Loop and lock area.These may clean up a bit more if not then the loop will need to be refinished.
|
40
Gutting the cabnet continues.
|