122
|
123
New plastic set will be swapped.All hardware will be polished or replaced as needed in the process.
|
124
New slot plastic.A real one no stickers :-)
|
125
Plastic set swapped.The large red stack is the toughest one.Lots of drilling and riveting.
|
126
Playfield is prepped for rebuild.
|
127
Rebuild begins.
|
128
Through parts are being installed.
|
129
|
130
I reused the existing jet bodies because the true williams bodies are not to be found lately and TZ needs the clearance o
|
131
Third magnet install just about complete topside.The guides were drilled and optos are installed.
|
132
All targets will be replaced with reinforced versions with the exception of two that will not fit next to the slot side.Th
|
133
Switch harness is rebuilt and in place along wit some of the coils.
|
134
Prepping the magnets for installation.First step is turning the use poles to remove the mushrooming.
|
135
New pole turned as well so all three now match.
|
136
New magnets are being installed because the others were so badly mushromed that remove without destroying the existing one
|
137
Working on populating the 8 driver for the added magnet.
|
138
8 driver populated and installed.
|
139
Magnets are fitted and leveled.The lamp harness is roughed in place.
|
140
Underside rebuild complete.
|
141
Cabinet rebuild complete.
|
142
|
143
|
144
Correct style door installed but now in the US version.
|
145
Playfield back in the cabinet.
|
146
Added magnet looks factory.
|
147
Door panel inserts look a lot better.
|
148
|
149
Rust and corrosion are gone.
Almost done.
|
150
Before powering it up I need to rebuild the DMD panel.
|
151
DMD plastic has been washed and buffed to eliminate as much of the fine scratches as possible.
|
152
New display is being installed.The old one is badly burned in which means the images frequently displayed are visible in
|
153
Panel rebuilt and ready to install.
|
154
Panel installed.Game powered up for testing.
|
155
Testing some functions prior to adding the next layer.
|
156
Gumball machine will be taken apart cleaned and rebuilt.
|
157
Gumball machine rebuilt and supplied gumballs are installed.
|
158
Full effect of the Pinbits gumball lighting mod.
|
159
Not too much left.A couple ramps,wireforms ,clock and the mini.
|
160
|
161
|