81
|
82
After a day or two of curing cabinet should be ready for the final sand and correct gloss clear application.
|
83
Now that the cabinet is just about ready to begin rebuild I will work on getting the rest of the parts in order.
Starti
|
84
I am making new wooden panel this time around for all the needed components.After putting that much effort into the cabine
|
85
New panel is t nutted with new hardware.
|
86
I had just about everything at least nickel plated to freshen it up as much as possible.
|
87
A newly serviced/rebuilt original board is used.
|
88
Transformer panel build up complete.
|
89
Alright before I put the final finish on the cabinet I need to make the correct hole for the speaker.
|
90
Speaker hole is made.
|
91
Apron is sanded and ready for final repaints and correct style clear.
|
92
Final coat of black is sprayed.
|
93
Clear is applied.It is the semi gloss variety but wet in the pic.Will die down as it cures.
|
94
Head is sanded.
|
95
Final clear applied to the head.Matte style finish still wet in the pic.
|
96
Lower is final sanded.
|
97
Ready to clear.
|
98
Final clear applied to the lower.
|
99
Gloss will die down.
|
100
|
101
Final clear is starting to flash off to the correct gloss level.
Cabinet will be ready to begin rebuild after an over
|
102
Cabinet is cured and will be ready to begin rebuild.
|
103
Apron is cured as well and it does not look as if it has ever been decaled.Has the correct style gloss.
|
104
Apron is finished and will be put away until it is needed.
|
105
Transformer panel was lightly misted in gray because I think it looks much better that way.I also made a new speaker pla
|
106
Ready to begin the cabinet rebuild.
|
107
New rails and nails are installed.
|
108
The larger internal parts were nickel plated.
|
109
Braided with new style reinforced leg plates installed to give solid bolt anchors and added corner strength..
|
110
|
111
Internal is done less the wiring.
|
112
Coin door rebuild .I had the major and some minor parts nickel plated or chromed as needed.
|
113
Outer skin is new.
|
114
Internal parts plated.
|
115
I had the hinge redone as well.
|
116
Installing new bulb sockets and going through all wiring.
|
117
Rebuild complete.
|
118
This was the best coin slot configuration I could come up with working off what I have in house for this era game.The
|
119
Head is on lower.I still have the framing of the glass to install.
|
120
Wiring is cleaned and being rebuilt and placed one connector at a time.
|