81
|
82
Head cleared.
|
83
|
84
This is a full gloss clear for right now.After it cures I will sand it and continue the refinishing process which will inc
|
85
While I wait for the new cabinet to cure a little more I have started teardown the old rotten one.That is mold and mild
|
86
Coin door and other parts shows signs of moisture and corrosion so I will have everything I can or that I need to nickel o
|
87
Just got everything back from the plater.
|
88
Cabinet is being prepped for the second gloss clear.
|
89
|
90
Cabinet is cleaned,the neck is painted black and it is ready for the second clear.
|
91
Second clear applied.
|
92
|
93
|
94
|
95
After is cures it should be ready to sand and then apply the final matte clear.
|
96
The replacement playfield is not drilled or dimpled so it will have to be templated and finished before I continue the c
|
97
Top side is drilled and dimpled.
|
98
Underside is now drilled and dimpled.
|
99
Recesses had to be drilled for the screw heads in the zipper flipper assembly.
|
100
|
101
I will be ready to move forward on the playfield now.Hopefully I got all the holes.It is tough to get this perfect with
|
102
Playfield sanded second time.
|
103
Ready for the final clear.
|
104
Final clear applied.I masked the roll over inserts until the final pass to help keep them from getting gummed up with c
|
105
While I wait for the playfield to cure I will rebuild the coin door.All parts have been plated or polish.The skin is bein
|
106
Door is rebuilt and the wiring was redone neatly.
|
107
Outside shows a couple finger prints from the rebuild for right now but is is very nice.
|
108
Tearing down the lamp panel next.I will need to rebuild several connectors as well as clean the wiring and refinish the
|
109
|
110
Torn down and masked.
|
111
Lamp panel refinished.
|
112
All the .1 connectors will be rebuilt.I will rebuild the .156s only if needed.They are far less problematic compared to th
|
113
New housings will be white.
|
114
All the .1 connectors are rebuilt on the lamp panel.
|
115
New displays are installed and the panel is rebuilt.
|
116
Cabinet is sanded for the final clear.
|
117
Head is getting some minor repaints.
|
118
Ready to clear.
|
119
Matte clear applied.Shiny now but it is wet and will die down as it cures.
|
120
Close up of the relocated shooter.No way of telling it as been done even in a full gloss.
|