81
Final clear applied.
|
82
|
83
|
84
While the playfield cures I will move onto the final rebuild of the cabinet and parts.
|
85
Plastic set to be replaced.
|
86
New plastic set.Both the screened and clear set are being replaced.
|
87
New set swapped out.
|
88
Lower is ready to decal and rebuild.New reinforced let plates have been installed along with all new ground braid.
|
89
Head is rebuilt to a level that is needed prior to decal application.
|
90
Cabinet is decaled.The lower edges have been finished out and new rails have been installed.The head decals are in place a
|
91
Cabinet rebuild nearly complete.
|
92
Head edges are finished out.
|
93
Plated parts are rebuilt and installed.
|
94
Coil assemblies have been torn down and polished.Now ready for rebuild with new hardware,sleeves etc.
|
95
The Merlin popper will be upgraded from the black/worn one on the right to the stainless enhanced Mantis version on the le
|
96
Coil assemblies rebuilt.
|
97
Speaker panel will be rebuilt next.A new clear window will be installed.
|
98
The housing was refinished.There isn't much that can be done with the minor scuffing of the chrome script but I will touch
|
99
Rebuilt.
|
100
Coin door need to be cleaned and poperly refinished.
|
101
The door does not have the correct style finish.It should be more of a flat base with gloss specks spit on at random.
|
102
The internals are dirty with over spray on the wiring.
|
103
Coin door torn down for cleaning and refinishing.
|
104
Coin door refinished correctly.
|
105
Coin door rebuilt with new slot faces and quarter inserts.
|
106
Coin door installed.
|
107
DMD panel in place.
|
108
All wiring and hardware are installed and very neatly routed.
|
109
|
110
|
111
Game is back on all four legs and the cabinet restoration/rebuild is complete .Playfield rebuild is next.
|
112
Playfield sanded ready to polish.
|
113
Playfield polished ready to begin reassembly prep.
|
114
Underside sanded clean as possible and t nutted.
|
115
Through parts installed.
|
116
|
117
|
118
|
119
Lighted backboard mod in place and neatly wired using factory colors and correct plugs.
|
120
Underside is ready for rebuild.
|