1
Funhouse base game.Pretty rough.
|
2
|
3
|
4
Door is no good. Neither is the lock bar but really when it comes to FH I don't need too much beyond the harness and hard
|
5
|
6
Cabinet is screwed together.
|
7
Head is coming apart.Both the head and lower will be replaced.
|
8
|
9
Playfield is really bad and will be replaced.Apron will need to be redone as well.
|
11
|
12
Inserts are REALLY raised.
|
13
Rudys head looks fine to work off of so that is good.
|
14
Translite needs a little work but should be fine.
|
15
Lamp panel should clean and refinished no problem.
|
16
Boards are dirty and may have issues .
|
17
Underside is filthy.
|
18
Inside the cab is typical dirt,rust corrosion etc.Not anything I haven't seen or dealt with before.
|
19
|
20
|
21
Inside the coin door just helps highlight the moisture issues.
|
22
|
23
|
24
|
25
Teardown in process.Not a lot worth documenting.
|
26
Playfield stripped.
|
27
Cabinet gutted and ready for the dumpster.
|
28
Pile of parts to begin restoring.
|
29
Driver board has some issues and hacks.Hopefully it can be repaired.If not I have original boards I can use as replacemen
|
30
New playfield will need to be drilled and dimpled before sanding and reclearing.
|
31
Example of drilling and dimpling topside.
|
32
Topside is now fully drilled and dimpled.
|
33
Underside will nee to be pre-drilled/dimpled next.
|
34
New cabinet is being prepped for prime.
|
35
|
36
Cabinet primed and guide coated.
|
37
|
38
Sanded and getting final repairs before paint and clear.
|
39
Replacement playfield is prepped for clear.
|
40
Cleared.
|
41
|