42
|
43
Mine hole wear is average I would say.I have definitely seen worse.
The hole from the added post should not be a tough f
|
44
A little wear in the jet bumper area and mine popper exit.
|
45
Some more wear at the saloon popper exit.Also very common on CC.
|
46
Back to gutting the cabinet.
|
47
Head gutted.
|
48
Lower gutted.
|
49
This is a close up pre teardown of the underside of the cabinet.Crappy decal job and prep have made replacement a requi
|
50
Ready for the dumpster :-)
|
51
The coil assemblies will be torn down for polishing and rebuild.
|
52
Coil parts are ready for tumbling and polishing.Parts not fitting that description(plastic parts and boards that go to the
|
53
The coil brackets that were tumbled are ready for final polishing and rebuild.
|
54
|
55
Flippers rebuilt with all new parts less the plates.
|
56
|
57
Coil assemblies rebuilt.There are a couple others to be done but they are too large and will have to be done by hand.
|
58
Back to the playfield.Shooter lane will be reworked a bit first.
|
59
Shooter lane sanded as clean as possible.
|
60
|
61
Playfield is now in the paint shop.
|
62
Playfield is being sanded and prepped for he first clear application.
|
63
Playfield is prepped and ready for some minor rework prior to the initial clear.
|
64
Shooter lane has been further reworked.
|
65
There are some holes down low that have sanded through.These are screw pops I will fix them.
|
66
|
67
Holes are filled.
|
68
Holes are repainted.
|
69
There is a break through nest the left bullet in the orange that will need some work.
|
70
Repainted.
|
71
The holes and divots will be filled next.I won't do the added hole in front of the keep out area now I will do that la
|
72
|
73
Areas filled.
|
74
These areas will also require filler.
|
75
Loop and other area are filled.
|
76
Ready for a first clear.
|
77
First clear applied.Focus on the shooter lane here.
|
78
The holes that were repaired turned out great.
|
79
The wear in the orange is a thing of the past :-)
|
80
The rest wil be taken care of after it is cured and sanded.
|
81
After a few days cure I will sand it down and begin the more detailed refinishing process.
|