41
Mylar removed at the pop bumpers.
|
42
Mylar removed at the ball drops.Many of the inserts will need to be stripped since they are crackling.
|
43
Mylar removed on the other side.The color difference in the ghost will have to be addressed since it shows ball swirl.
|
44
These inserts will have to be removed and stripped.
|
45
I do not have an acceptable replacement for the ELVIRA insert lettering so I will rework those as well as possible withou
|
46
T?he potion bottles will need to be stripped.
|
47
The JAM inserts will need to be removed.The large moon like insert will be re leveled.
|
48
Inserts are removed and or stripped as needed.
|
49
Shooter lane sanded clean.
|
50
|
51
|
52
Inserts are reglued and a coat of adhesion promoter is down to help give a better bite on the raw plastic inserts.
|
53
First clear is applied.This is done to finish leveling the surface prior to begining the repaints.A playfield like this is
|
54
Shooter lane look promising.The stripped inserts have cleared up pretty well.Far less crackling or scaling in them.
|
55
|
56
Considering what has already been done the removed inserts are fairly level.After I sand it they should be just about ri
|
57
The bottle inserts lenses look much better.
|
58
After it sets just a couple days I can get back to it.For now it needs to soak in.
|
59
Head is removed and gutted.
|
60
Lower gutted.
|
61
Ready to strip.
|
62
Cabinet will be chemical stripped.
|
63
Stripping in process.
|
64
Stripped of the vinyl and ready to go to the paint shop for repairs and refinishing.
|
65
Repair process begins.
|
66
Head is repaired and ready to prime.
|
67
Lower repaired and ready to prime.
|
68
|
69
Cabinet is primed and guide coated.
|
70
Cabinet is sanded and ready to repaint.
|
71
Going to sand the bottom of the cabinet best I can.
|
72
Sanded .
|
73
Now I am ready to paint and clear.
|
74
Cabinet based in black.
|
75
Cabinet cleared.Will be ready to sand and decal in a day or two.
|
76
Cabinet is dry and ready to sand.
|
77
Inside was sanded clean as possible for a cabinet that is over 20 years old.
|
78
Sanded ready to prep for decals and rebuild.
|
79
Head is prepped to screen.
|
80
Correct System 11 style screen was used.
|