1
AFM starting platform.

2
Faded which is typical.

3

4
Other side is not quite as faded but more on the front than the back end.

5
Teardown begins.

6
Head gutted.

7
Underside teardown begins.

8
There are some wiring issues here and there all minor but this is just a sample of them.

9
Wiring and most mechs removed.

10
Topside teardown nearly complete.

11
Playfield is out of the cabinet.Topside stripped complete.

12
Underside stripped complete.

13
Cabinet is being gutted.

14
Head will be restored and reused.

15
Lower will be replaced.

16
New lower and used head are ready to begin prep.

17
Replacement playfield will be reworked prior to install.

18
The main issues will be highlighted in the following pics.
Mostly what needs to be taken care of are clear and insert s

19
There are some minor specs of trash present.Nothing alarming but worth noting in the picture.

20
Graining.

21
A bit puddled.

22
Sanded and ready to clear.

23
Cleared.

24
Wet in these pics but that should be what it needs in terms of clear application

25
After it sets a few days it will be ready to sand and polish.

26
Moving onto the ramps.They will be new.

27
Flaps were removed so I can install the Pinbits stainless version.

28
New ramps are built.

29
Head is stripped and repaired.

30
New lower is guide coated to help get it straight prior to priming.

31
Sanded and ready to prime.

32
Primed and guide coated.

33
Sanded and ready to refinish.

34
Sealed and paintd.

35
Head cleared.

36
Lower cleared.Gloss will flatten outto the correct level as it cures.

37
Head screened with the warning text.

38
Ready for decals and rebuild.

39
Playfield is sanded and polished.Ready for rebuild.

40
cabinet is decaled.