1
AFM starting platform.
|
2
Faded which is typical.
|
3
|
4
Other side is not quite as faded but more on the front than the back end.
|
5
Teardown begins.
|
6
Head gutted.
|
7
Underside teardown begins.
|
8
There are some wiring issues here and there all minor but this is just a sample of them.
|
9
Wiring and most mechs removed.
|
10
Topside teardown nearly complete.
|
11
Playfield is out of the cabinet.Topside stripped complete.
|
12
Underside stripped complete.
|
13
Cabinet is being gutted.
|
14
Head will be restored and reused.
|
15
Lower will be replaced.
|
16
New lower and used head are ready to begin prep.
|
17
Replacement playfield will be reworked prior to install.
|
18
The main issues will be highlighted in the following pics.
Mostly what needs to be taken care of are clear and insert s
|
19
There are some minor specs of trash present.Nothing alarming but worth noting in the picture.
|
20
Graining.
|
21
A bit puddled.
|
22
Sanded and ready to clear.
|
23
Cleared.
|
24
Wet in these pics but that should be what it needs in terms of clear application
|
25
After it sets a few days it will be ready to sand and polish.
|
26
Moving onto the ramps.They will be new.
|
27
Flaps were removed so I can install the Pinbits stainless version.
|
28
New ramps are built.
|
29
Head is stripped and repaired.
|
30
New lower is guide coated to help get it straight prior to priming.
|
31
Sanded and ready to prime.
|
32
Primed and guide coated.
|
33
Sanded and ready to refinish.
|
34
Sealed and paintd.
|
35
Head cleared.
|
36
Lower cleared.Gloss will flatten outto the correct level as it cures.
|
37
Head screened with the warning text.
|
38
Ready for decals and rebuild.
|
39
Playfield is sanded and polished.Ready for rebuild.
|
40
cabinet is decaled.
|