1
Typical FH.Faded but complete.That is about all you need in one these days.
|
2
|
3
The backbox has a pretty large chunk knocked out of it.It has been "touched up".
|
4
|
5
Other side is equally faded.
|
6
Getting into the teardown now.
|
7
The apron looks pretty good.
|
8
Playfield is typical but not as bad as many I have seen.
|
9
Everything looks to be complete.
|
10
Inside isn't too bad.
|
11
|
12
Underside is fairly clean for this game.It all has to come off and be cleaned one part at a time though.
|
13
starting teardown.
|
14
Boards look good but will be serviced.
|
15
|
16
Head gutted.
|
17
Playfield teardown in process.
|
18
Playfield is out.
|
19
Playfield teardown complete topside.
|
20
Underside teardown complete.
|
21
Cabinet is being gutted.g
|
22
|
23
Cabinet is gutted ready to begin stripping.
|
24
Stripping in process.
|
25
Cabinet stripped.
|
26
Cabinet sanded and ready to begin repairs.
|
27
Head stripped and ready for repair.
|
28
Replacement playfield is from the first run so it will need to be drilled and dimpled.I like the colors of the first run a
|
29
This area will serve as a small example of what holes are missing.There are hundreds of them between n the top and bottom.
|
30
The underside will need to be dimpled/predrilled.That means it is currently blank and has no holes for any of the parts.
|
31
This area will serve as the example for the underside.
|
32
Underside pre drilled.
|
33
Underside overall now dimpled.
|
34
Top side lower drilled.
|
35
This was the previous example area.The jet bumper holes have also been properly recessed.
You can see there are a lot of
|
36
|
37
|
37a
Playfield prep is complete in terms of drilling and dimpling.
I will sand and clear it next.
|
38
Coils have all been polished and rebuilt.
|
39
Flippers are rebuilt with the correct kits and coils.
|