1
Theatre of Magic base game.
|
2
Drilled in the front.
|
3
Cabinet has many repairs and repaints.They are not terrible but they are not great either.
|
4
Back is rough.That is most because it was repainted with a brush I think.
|
5
Playfield is average at a glance.
|
6
First thing that really jumped out at me is that it is missing the ball fence on the apron.Luckily I have some.
|
7
This picture just shows what a ball fence is to highlight what is missing.It is the chrome piece and it keeps air balls from
|
8
The playfield has a couple of questionable areas.One being this touch up in the red area with a white cross .
|
9
I will need to look over my other examples but I am pretty sure working off memory that there is something wrong with this
|
10
The ramp floors are blown out and cracked barely secured by the screws.
|
11
the wrong rivets were used to attach the shooter ramp flap.
|
12
The shooter lane has a little ground in dirt but should sand and restore nicely.
|
13
This is a typical problem on TOM playfeilds in this area and that is the insert bordering(dark lines through the art) on
|
14
Black paint was put on the hanger brackets and I think silver was used on the lockbar receiver.Wrong sticker for the ball
|
15
Inside is on par with the rest.
|
16
The wiring as a little hacked for the high power interlock.There are a series of black wires going to the switch that sho
|
17
Butt connectors were used to make this "repair" that will be taken care of as well.
|
18
The cash box bracket is badly bent /deformed so that will be replaced.
|
19
There are some extra holes in the floor from a counter or some other device that has since been removed,None of the holes a
|
20
The other parts inside the lower are corroded and or rusted..
|
21
Underside of the playfield and wiring are also on par with the rest of the game.
|
22
There are some issues on the lower portion.
|
23
Electrical tape coming out of the trunk mech.
|
24
Broken jet bumper.
|
25
The wrong coil stop is used on the ball lock mech.
|
26
This is the correct stop.I have a spare mech to work off of.
|
27
Mix matched screws and hardware holding it all together.
|
28
Coils are missing the wrapper and or incorrect.
|
29
Corrosion on the resting brackets and other metal.
|
30
Transformer is rusted but will sand and refinish without a problem I am sure.
|
31
Translite is okay.Couple of minor spots to repair but nothing unusual.
|
32
The trim is cut too short and will need to be replaced.
|
33
The boards are okay .The dot controller has been replaced with an aftermarket version most likely because the original was b
|
34
The extra long ribbon cable from the dot controller is wrong.It most likely came from a CV since that is the only game I c
|
35
The GI section of the driver will need some work.That is normal.
|
36
The connectors are badly burnt and will be rplaced/rebuilt.
|
37
Teardown begins.All parts that will require brass plating are pulled first so I can get that going.
|
38
Another surprise inside the trunk is a balled up plastic bag and more wiring repairs.Some of the stand offs are peiced to
|
39
|
40
This is a NOS playfield.It has been previously cleared(poorly) by someone else but it can be reworked.
The first order o
|