82
New post etc.
|
83
|
84
Through parts installed.
|
85
Underside rebuild begins.
|
86
Troll targets will be replaced the reinforced version.
|
87
Sling switches are being replaced.
|
88
All the roll over switches were replaced.During this process the quick connect terminals were removed.I find the switch
|
89
Most of he wiring is roughed in place now.
|
90
Most coils are now in place.There are a few I will wait to install until after the playfield is in the cabinet because
|
91
Going to rebuilt the trolls next.New switches and modified heads.These have red LED eyes.When I do this I will eliminate t
|
92
Heads rebuilt.
|
93
Plug is made on the main harness with correct colors to identify everything.The orange, orange/white wiring is used because
|
94
Plated brackets are installed.
|
95
|
96
Wiring is just about complete for the time being.I will tighten it up later once I have everything else in place.
|
97
Playfield is in the cabinet.
|
98
|
99
|
100
Plastic set is swapped out.
|
101
The generic white stand offs were changed out for a more attractive version.
|
102
Speaker panel will be rebuilt next then it is ready to power up.
|
103
Speaker panel is bei ng rebuilt with a new clear window.
|
104
New DMD and speakers.These are dual 5 inch.
|
105
Panel rebuilt.
|
106
Castle gate mech will be replaced with the upgraded version and rebuilt mechanically with a new main gear and shaft.
|
107
New castle gate has a riveted look.
|
108
New switches are installed with protective clear tubing around the wires.
|
109
Gate and drawbridge mech fully rebuilt.
|
110
Powered up for testing.
|
111
|
112
Trolls installed.
|
113
New moat is needed.
|
114
Moat is built.
|
115
New castle with LED eyes is fit in place.
|
116
Merlin plastic is modified and backlit.
|
117
Red caps installed.
|
118
This one has been properly modified to clear the damsel diverter.
|
119
New left ramp is built.
|
120
New switches were installed through clear tubing.
|
121
New lamp sockets were also installed.
|