121
Playfield has been polished.
|
122
|
123
|
124
Upper playfield sanded and ready to polish.
|
125
Upper playfield polished.
|
126
Everything is now in order and the game is ready for final rebuild.
|
127
Cabinet rebuild is complete and wired.
|
128
Power box was replated to make it look nice and fresh.
|
129
|
130
Lamp panel and rebuilt dmd panel are installed.
|
131
Game is up on polished chrome legs.
|
132
|
133
Playfield is t nutted and ready to start populating.
|
134
Through parts are installed on the lower playfield.
|
135
|
136
Ready to flip for underside rebuild.
|
137
All coil assemblies were polished and rebuilt.The coils themselves were all replaced with factory coils.
|
138
Flippers were rebuilt entirely.WH2O is strange in that it uses 3 different flipper value coils.
|
139
|
140
Underside rebuild begins.
|
141
Switch harness is being rebuilt and placed.
|
142
With a full day of wiring in the underside is nearly rewired.Not neat yet but mostly in place.
|
143
Underside wiring is complete for now.I will finish it up more once the rebuild is complete.
|
144
|
145
|
146
Playfield is ready to go back into the cabinet.
|
147
Playfield is back in the cabinet.
|
148
Topper is cleaned and pressed out.The new dome is installed.
|
149
Playfield is powered up for preliminary testing.
|
150
Almost there.
|
151
Most of the ramps are new.I did not replace one or two because they were in good shape and I prefer the fit of the factor
|
152
Most of the lower is now in place.White post rubber is used to best match the playfield and associated parts.Also makes
|
153
|
154
Apron has been clean and polished and is now in place.
|
155
Should have the lower wrapped up tomorrow .
|
156
|
157
|
158
|
159
|
160
|