121
Cabinet is wired.
|
122
Boards and lamp panel are in place.
|
123
Up on legs.
|
124
Cabinet is ready for the playfield.
|
125
Topside is as far as it goes until it gets back in the cabinet.
|
126
|
127
|
128
Ready to flip and wire.
|
129
|
130
Flasher/pop bumper mod is being very neatly done with a factory look.
|
131
Switch harness in place.
|
132
Lamp harness in place.
|
133
all coil assemblies were rebuilt and polished by hand.
|
134
Solenoid harness in place. A few more details and I will be ready to button up the wiring and set the playfield in the cabi
|
135
Wiring is complete.
|
136
Brackets were plated.
|
137
Playfield is ready to go in the cabinet.
|
138
Playfield is now in the cabinet.
|
139
The apron was sanded,painted and cleared once more.
|
140
Apron is installed and decaled.
|
141
Next I will start the tedious process of manually lighting the brake lamps on the speaker panel.
|
142
This is the replacement speaker panel plastic.Hard to tell in the pictures but the bumpers are done in mirrored chrome wh
|
143
First I need to make a template.
|
144
Holes are drilled for the red LEDs.
|
145
I also had to drill the speaker grilles in some spots.
|
146
Wood panel is refinished to clean it up from the drilling.
|
147
I am just getting started placing and soldering the 18 LEDs that will be added.They will be wired in banks of 6 in a seri
|
148
Wiring is roughed in.Space is tight so it cannot be done very neatly but I will further cover it.
|
149
Panel is now rebuilt.A new DMD is installed and black duct tape is used to protect and disguise the brake lamp mod.
|
150
Checking all my alignments.
|
151
Panel turned out great.I hate doing them though.It is very time consuming.
|
152
Game is now powered up for initial testing.
|
153
Brake lamp mod now in place.
|
154
Red lighting is used for the KISS bulbs.
|
155
A nice window has been cleaned and buffed.New decals were also installed since the part is not available right now.Hologr
|
156
Original bowl ramp is rebuilt and in place.I like to use the original in this case because the ridges in the bowl are mo
|
157
New plastics are being placed.
|
158
Teal conversion complete with the install of the bumper caps.
|
159
Ramps are about all that is left.
|
160
Ramps are now in place.All that is left is flipper set up and the translite.
LEDs are in the bowl.I anted to give that
|