41
The flipper alignment holes were not there so those have been added.Roll pins go inside them.
|
42
The old playfield shows the correct drilling in the jet bumper area.
|
43
Notice the new playfield is not properly drilled in this area.The holes should be countersunk so the heads of the jet bum
|
44
Cabinet is almost emptied.
|
45
|
46
|
47
Cabinet is being stripped and straightened.
|
48
Cabinet stripped interior sanded as clean as possible.
|
49
Repairs are just about complete.
|
50
Lower is ready to prime.
|
51
Head is ready to prime.
|
52
Primed and guide coated.
|
53
|
54
Playfield is ready to prep for an HEP clear application.
|
55
There is some minor ghosting or bordering that was cleared over ona few of these inserts so I will border them a little mor
|
56
Jet bumper nail holes are counter sunk.
|
57
Playfield is prepped and ready to clear.
|
58
Playfield is cleared and the insert corrections are made.
|
59
Since the playfield was previously cleared this single application will be all that is needed in terms of the actual clearin
|
60
Cabinet is ready to sand and prep for repainting.
|
61
Sanded ready to paint and clear.
|
62
|
63
Painted and cleared.
|
65
Cabi net is unmasked.
|
66
Head is screened.
|
67
Playfield is sanded and ready to polish.
|
68
Playfield is polished and ready for rebuild.
|
69
|
70
|
71
|
72
|
73
|
74
|
75
|
76
|
77
|
78
|
79
|
80
|
81
Gun has been fully plated and rebuilt.
|