121
Cabinet is sanded and ready to prep for final paint and clear.
|
122
Cabinet is ready to paint.
|
123
Cabinet is based in black.
|
124
Cabinet is cleared with a matte clear coat.It is glossy in the pics but will gloss down as it cures.
|
125
|
126
Head has cured and is ready to screen.
|
127
|
128
Warning text is screened.
|
129
Head is ground braided.
|
130
Lower is sanded and ground braided.
|
131
Ready to clean and decal .
|
132
Cabinet decals are applied.
|
133
I will finish the edges out shortly.
|
134
Playfield is t nutted and ready for rebuild.
|
135
Through parts are installed topside.
|
136
All metal was regrained all fasteners polished,post replaced etc.
|
137
New jet bumper parts.
|
138
|
139
Underside is ready to rewire.
|
140
All new reinforced targets(supplied) will be installed.
|
141
All copper blade switches are polished.
|
142
Full LEDs are being installed.
|
143
Flipper assemblies were polished and rebuilt using all new componenets with the exception of the plates.
|
144
Switch harness is rebuilt and roughed in place.Lame and other boards are also installed.
|
145
Lamp harness is roughed in and in place.
|
146
All other coil assemblies were also polished and rebuilt .Many of the coils were replaced.
|
147
Jet bumper assemblies are in place now.
|
148
Most of the coils and wiring are now in place.Soldering the solenoid harness in place and running the opto harness will
|
149
An upgraded 10 switch opto board is being installed to replace the flaky one that was in the game.
|
150
Underside wiring is complete.
|
151
|
152
|
153
Ready to drop into the cabinet.
|
154
Cabinet edges are finished .
|
155
Better shot of the cabinet edges.
|
156
|
157
|
158
Head is rebuilt and on the lower.I will installed the side rails last on this rebuild because of the powder coating.
|
159
I have built a new extended buy in button so the wiring will be neat and clean.
|
160
Cabinet is neatly wired.New upgraded speakers,flipper opto boards and plated parts.
|