1
Game as it arrived.
|
4
Unpacking the game.
|
5
Game is set up.
|
6
Average game over all,Cabinet is a little beat up but typical.
|
7
Playfield is average maybe just a bit below in terms of wear but fine for our purposes since it will be replaced.
|
8
|
9
|
10
|
11
Inside is average.
|
12
|
13
Game has the wrong flipper coils.Not a big deal as I will change them out in the process.
|
14
|
15
Moving to the NOS playfield.
|
16
|
17
Mylar sections will be removed first.
|
18
Playfield is ready to prep for the first clear application.
|
19
Shooter lane was reworked a bit for a clearner look and smoother transition.
|
20
Playfield is sanded and ready for the first clear.
|
21
First clear applied.Shooter lane rework is highlighted in this picture.
|
22
|
23
|
24
|
25
While the playfield cures I will move onto the cabinet.
|
26
I have a spare AFM cabinet that I have stripped and repaired.This will help speed up rthe process.
|
27
Cabinet is ready to prime.
|
28
Cabinet is primed and guide coated once it dries fully I will sand and refinish it.
|
29
Playfield is prepped and ready for the second and final clear application.
|
30
Final clear is applied.After it sets about a week I will sand it and final polish.While I wait for it to cure I will get in
|
31
Game is being torndown.
|
32
Driver board will need some work in the GI section and connectors as it shows burn and poor repair.Nothing out of the ord
|
33
Head is gutted.
|
34
Playfield is being torndown topside first.
|
35
There is a "homemade" ball guide in this picture.I should have a correct one from a parted out AFM to donate.
|
36
Here is the "ball guide" now removed.
|
37
Jet bumpers are built incorrectly.The steel armature should be on top and the bake lite on the bottom.
|
38
Wiring is removed.
|
39
Underside is almost stripped complete.
|
40
Topside is almost stripped complete.
|
41
Playfield is out of the cabinet.
|
42
|