1
Game as it arrived.
|
2
Being unpacked.
|
3
Set up on legs.
|
4
|
5
|
6
Head will be at least partially emptied because of the wiring that needs to come out of the way to pull the playfield.
|
7
|
8
Teardown in process.
|
9
|
10
Playfield is nice overall but has some issues.
|
11
|
12
|
13
Insert bordering in the book area.Some can be fixed other parts might b tougher unless you are willing to comprimise the a
|
14
There is a touched up chip in the purple area.
|
15
There is some insert ghosting here and there.
|
16
Other insert ghosting areas.
|
17
A little more ghosting.
|
18
Inside is clean for an original.
|
19
Underside is ok might benefit from some metal plating and polishing.
|
20
Teardown on process.
|
21
The trunk stand off that was missing a screw has a cut in it as well.I should have a replacement.
|
22
|
23
Teardown nearly complete.
|
24
Playfield is out of the cabinet and now of course I can clearly see this.
Major warp in the upper playfield.Haven't seen
|
25
Trying to give some better perspectives in these pics.
|
26
Playfield stripped complete.
|
27
The warp is a bit obvious right now.,
|
28
|
29
Playfield stripped complete.
|
30
I think the pin has been in a moist environment.The t nuts have some rust and the metal is lightly corroded here and there
|
31
A better shot of what we are dealing with.
I am pretty sure I can get this straightened out or vastly improved.It seems
|
32
I have lightly dampened it and screw it into a solid crate in the heat of the shop.This should help pull it back in.
|
33
Better shot of how it does flatten out.
|
34
After a few hours I have done the same but in reverse to help make it stick.I will let it set overnight.
|
35
The ramps are fine but will need to be cleaned,flamed and rebuilt with stainless flaps.
|
36
Ramp 1 rebuilt.
|
37
Stainless flap installed.
|
38
Ramp 2 rebuilt with stainless flap.
|
39
Flippers are being rebuilt now.
|
40
Flippers rebuilt.
|