41
|
42
Wear at teh chair hole and other spots will be taken care of.
|
43
The shooter lane is not bad but there is a small divot that was filled at the factory.I should be able to sand that out and
|
44
All the holes have been sanded clean and the playfield is ready to final prep for the initial clearcoat.
|
45
|
46
The shooter lane sanded up very nice.It is much improved and will not require a repaint.
|
47
The chair hole will need a little rework but for now it is sanded back to all solid wood with no burrs or splinters.
|
48
Same process on the other high traffic areas.
At this point it is ready to clear the first time.
|
49
Chair hole was repaired with carbon fiber filler.The bevel is not back in it yet.I will put a coat of clear on it before do
|
50
Intital clear has been applied.
|
51
After the first clear dries a couple days I will bevel the chair hole and refinish it as well as do the minor touch ups nee
|
52
Playfield is cured and ready to sand.
|
53
Playfield has been sanded and the chair hole has been properly beveled.
|
54
Chair hole refinished in the wood tone color.
|
55
Chair hole is finished.
|
56
There is a little bordering of theHit Cousin It insert that is showing through in the upper right yellow area around fester
|
57
Fester bordering and shoot again insert refinished.
|
58
Fester bordering and shoot again insert unmasked.
|
59
Ready for the final clear.
|
60
Final clear applied.
|
61
Shooter lane turned out great.
|
62
Chair hole repair is nice.
|
63
Uncle Fester/shoot again insert rework undetectable.
|
64
While the final clear of the playfield cures I will rebuild all the coils and assemblies.
|
65
The coils are completely broken down.All will be cleaned/replaced and rebuilt with new sleeves.The hardware and brackets wi
|
66
All the parts and coils are ready for reassembly.
|
67
Coils rebuilt.
|
68
The cabinet is gutted so it can be thoroughly cleaned,sanded, refinished inside etc and all the parts washed or polished as
|
69
|
70
All the cabinet bolts are refinished.
|
71
Cabinet has been freshened up ,repainted where needed,new ground braid installed etc.
|
72
All the cabinet hardware has been tumbled.
|
72a
All the other cabinet parts have been cleaned,repaired repainted as needed and bagged up in wait for reassembly.
|
73
Reassembly of the cabinet is in process starting with the head.
|
74
The head is back on the lower and the cabinet rebuild is nearly complete.I will put the rails on later since they are the
|
75
|
76
Playfield is ready for rebuild.
|
77
T nuts installed.
|
78
|
79
Through parts installed.
|