82
Flippers rebuilt with new coils,correct rebuild kits as well as new bushings and hardware.
|
83
I will be changing out the plastic set next.
|
84
The new example is on the left and it helps show how badly the originals have yellowed.
|
85
This plastic is missing part of the assembly.I will build it correctly.
|
86
New plastic correct built and complete.
|
87
The clear portions really help highlight just how yellow these plastics have turned.
|
88
New assembly is built.
|
89
Plastic set is done.
|
90
I will clean and rebuild the thing/ hand assembly next.
|
91
It is very dirty but should clean up.
|
92
Hand assembly cleaned and rebuilt.
|
93
Looking much better now.
|
94
Next I will clean,polish and rebuild the rest of the coil assemblies.
|
95
Many of the coils are damaged and the incorrect value.For example the yellow 23-800 coil should actually be a 26-1200(gr
|
96
The metal of the brackets is also quite corroded on some of these.
|
97
All new coils will be installed.With everything else that is wrong/going on with this game it just makes more sense to s
|
98
Coil assemblies cleaned polished and rebuilt with the new coils.
|
99
A close up of the now polished metal.The assembly with the white coil is a good example since it was completely black
|
100
Ready to move on to the replacement playfield.
|
101
the replacement playfield is a nice place to start but will require a good bit of work to be ready to install.
|
102
The main obstacle is that the playfield is not fully drilled nor dimpled.That meaning it does not have the majority of
|
103
This picture will be a good reference to compare to later once fully drilled and dimpled.
|
104
|
105
First I will dimple the underside.There are now marks or holes for the many parts that screw in here.
|
106
A used playfield gives an example of just how much is missing in terms of the holes/dimples..
|
107
Replacement playfield is now properly/accurately dimpled.
This needs to be exact in order to have proper parts alignm
|
108
Topside is now fully drilled and dimpled as well.
|
109
This area helps highlight just how many holes were missing it is a small example but when compared to picture #103 it
|
110
Playfield is now ready to begin the repainting and clear coating process.While it is new there are some art corrections to
|
111
The shooter lane is nice overall but will need to be smoothed in a bit.
|
112
the chair hole needs to be properly beveled to match the originals.
|
113
Chair hole is now correctly beveled.
|
114
Playfield is sanded.
|
115
Playfield is cleaned and ready to begin the repainting process where needed.
|
116
This is a small detail because it is mostly obscured by the apron once installed but I will be repainting the "miss
|
117
Gray is painted.
|
118
Green is painted.
|
119
Yellow is painted.
|
120
Bar code area is roughed in at this point.I will do more finesse and color correct work later on the second sand and cle
|
121
Black areas of concern are repainted.
|