42
The metal was polished also.
|
43
Front side rebuilt also has new labels.
|
44
The panel that holds the boards will be cleaned next.
|
45
Panel is cleaned.It will likely be further reworked and new labels will be applied but for now it will be shelved unti
|
46
The DMD panel is next.It will be torn down,parts painted polished and or buffed as needed.
|
47
|
48
May be hard to tell in the pictures because I missed documenting the process a bit but it has been torn down polished a
|
49
Backside now that it is refreshed.
|
50
Moving onto stripping the playfield.
|
51
Inside there are more discoveries like this one where they removed the cabinet knocker(a unique feature on this game)and
|
52
More discoveries like the wood screws wedged in the swamp scoop.Must have been having ball hang ups there.
|
53
The wiring harnesses are removed and separated.
|
54
Lamp harness.
|
55
Solenoid and switch harness.All will be thoroughly cleaned and properly rebuilt fixing any hacks wear from use or other
|
56
Under the playfield you can see where the left magnet has locked on and burnt up not only the coil itself but the pla
|
57
Here is the burnt magnet.It will be replaced along with many other if not all coils depending on what else I find.
|
58
Underside teardown nearl complete.
|
59
Moving to the topside.Apron is removed.It will need work that will be highlighted later.
|
60
This helps further show the condition.
|
61
Very rusty.
|
62
|
63
|
64
Topside teardown in process.
|
65
Playfield is stripped.
|
66
I will not bother taking the t nuts out since I will be replacing them along with the playfield.
|
67
I will finish gutting the cabinet next.
|
68
|
69
Head removed(and ready for the dumpster).
|
70
Lower gutted.
|
71
Lower ready for the dumpster.
|
72
Transformer cleaned and refreshed.
|
73
I will swap the power box out with a nickel plated one.
|
74
A new cord,switch and correct power outlet will also be added during the swap.The transformer tap will be redone with
|
75
Power box fully swapped and rebuilt.
|
76
All ball guides have been regrained.
|
77
All three scoop assemblies will be replaced with upgraded stainless steel weldements.
|
78
The old scoops are all broken at the welds.
|
79
Scoops swapped and rebuilt with new switches correct coils and the thing kickout assembly(big one)is wired with a plug to
|
80
The flippers will be rebuilt next.
|
81
This is the pile of trash that came out of the flipper assemblies.
|