1
Base Whitewater.Game has been poorly decaled so it looks unfaded but the cabinet is actually quite rough.
|
2
|
3
Translite looks good overall a little dirty and the lower channel is held on with electrical tape.Hopefully there will be no
|
4
Topper is faded and bubbling.Pretty much the norm on these.
|
5
Lamp panel will benefit from refinishing.
|
6
Most of the boards in the head are replacement versions.The dot controller,driver and flipper boards specifically.I will use
|
7
|
8
Playfield is decent at a glance.There looks to be a mix of new and old ramps and either decent or replaced boulders.
|
9
|
10
|
11
Shooter lane has a lot of ground in dirt.
|
12
Inside is dirty corroded disorganized.
|
13
|
14
There is a gap in the chocking ,floor and side.The lower will be replaced for a variety of reasons.Mostly the structural iss
|
15
|
16
Underside of the playfield is similar to the inside of the cabinet.
|
17
|
18
Head gutted.
|
19
Teardown nearly complete.
|
20
Playfield removed and stripped.
|
21
|
22
Playfield is in the paint shop.Stripped of mylar and overlays.
|
23
Repairs will be needed in the area where the overlay was removed.
|
24
Shooter lane needs work.
|
25
Raft inserts will need to be reworked.
|
26
|
27
Cleaned and ready for the initial prep and paint.
|
28
Shooter lane sanded as clean as possible.
|
29
Divot is filled in the popper exit area.
|
30
The glue that was caked on behind the targets has been removed with minimal damage.
|
31
Loop was sanded as much as possible in order to try and remove the ground in dirt trail.Was not possible so the upper area w
|
32
Wood tones masked and refreshed.
|
33
Divot repair is being repainted.
|
34
|
35
First clear applied.
|
36
|
37
|
38
|
39
|
40
|