41 The factory screen was applied crooked.On this side it is 6 and 3/16 from the top.
42 The other side is a bit below 6 so it is about a quarter of an inch off.Looks pretty drastic at a glance.
43 Reworking the face and seams now.
44
45
46 Reworking the interior.It was quite rough.
47
48 Ready to prime.
49 Areas that were reworked are now primed.
50
51 Sanded and ready to base then clear.
52
53 Based in black.
54 Cabinet is cleared in full gloss for the first application.This will seal,protect and build.The next and final application
55 Did not get the chance to capture all the repaint work but the results are obvious.Not more leg wear or other spots that
56
57
58
59 After this cures a day or two I will sand then do some final art tweaks and apply the final version of cleare
60 Head will also be sanded and recleared prior to screening and art application.
61 Missed the entire playfield restore documentation but the results are what would be expected and once it fully cures I w
62
63
64 Apron was repaired in the trough area,refinished as needed and cleared .
65 Playfield is final sanded and polished.
66
67
68
69
70 Now ready for rebuild.I did not attempt to repair the minor wear at the castle lock cut out.The main reason being that i
71 Cabinet is sanded and being prepped for the final touches prior to spraying the matte clear.
72 Head being prepped for final rework.
73 Head lightly based and now cleared.Gloss level will die down to a correct shine as it cures.
74 Lower is now rebased inside and fully cleared once more.Same as the head so gloss will die down as it cures.
75 Dried overnight now being unmasked.
76 A better shot of the gloss level now as it is dried. Probably not as impressive looking at a glance as a decal job might be
77
78 Head is screened and ready for rebuild.
79
80 Braided and being assembled.