41
|
42
|
43
Head is being torn down.All boards removed most are in rough shape they will be cleaned first then further evaluated.
|
44
Translite assembly has been cleaned and rebuilt.
|
45
|
46
The lamp panel will be addressed now.
|
47
Lamp panel torn down.The backside will be sanded as clean as possible.
|
48
|
49
Panel has been sanded flat and refinished.
|
50
Rewired on the backside.New labels will be installed prior to completion.
|
51
All metal for the panle was polished prior to rebuild.
|
52
Lamp panel rebuilt and complete.
|
53
All boards are rough and will require service.They have been cleaned and will be accessed one at a time starting here with t
|
54
Previously reworked at the transformer GI connector.This will need to be redone.
|
55
Backside of the driver at the GI connector.
|
56
Burnt/replaced TIP 102 will need to be redone.The board will also get new bridge rec,caps and connectors where needed.
|
57
Flipper board is pretty rough.TAf uses a very specific board so this will need work.Lots of previous repair has been done.
|
58
Burnt transistor have been replaced.Not too neatly.These will be redone.
|
59
|
60
Burnt on the backside,one chip previously replaced.
|
61
Dot controller shows rework and typical burn.
|
62
Backside of dot controller.
|
63
CPU will be gone through and switched to a remote battery holder.Not pictured is the sound board.It has not been previously
|
65
Underside is being stripped.
|
66
Swamp tunnel is shimmed with a nickel LOL!
|
67
Topside is being stripped.
|
68
Playfield stripped complete.
|
69
|
70
Cabinet will be gutted now.
|
71
|
72
Now that the playfield is out the water damage becomes even more obvious.This section is severely swollen.
|
73
|
74
|
75
Even the stop block is swollen.This cabinet would never be worthy of salvage at this level.
|
76
Head gutted and removed also trashed.Will be replaced.
|
77
Lower gutted.
|
78
Moving to the NOS playfield I will be using.It is NOS but will require a bit of work to be useable.Functionally it needs to
|
79
The blank purple square will be eliminated by filling in the missing art.
|
80
The following pictures will help highlight the many missing holes that need to be drilled for post and hardware.This must be
|
81
Original right inlane area with holes.
|