42
New head is being built and is on the lower.
|
43
Black trim is installed as requested.
|
44
|
45
Working through the boards.
|
46
Driver has been heavily reworked at some point and is suspect.
|
47
All these jumpers need to be removed.the board will need to e professionally reworked.
|
48
Dot controller board has typical heat damage.
|
49
Serviced and replacement boards.
|
50
Lamp panel has been cleaned,painted and rebuilt.
|
51
New labels and polished metal.
|
52
Serviced boards are now in place along with the replacement dot controller.
|
53
Cabinet rebuild is nearly complete.
|
54
Coin door was purposely refinished in glossier black to match the cabinet and trim.
|
55
Up on legs now.
|
56
|
57
Ready to teardown the playfield.It will go quickly since the new one is in place.
|
58
Heavy corrosion and discoloration on most of the metal.
|
59
|
60
Old playfield was gutted and the new one is being built.All parts removed from the old playfield are polished,plated ,r
|
61
Lighting will be added to the jet bumpers.These will be done to flash with pop activation for a little more interes
|
62
Most through parts are placed now.
|
63
All metal is polished,coil assemblies polished and rebuilt as well.
|
64
|
65
|
66
Underside rebuild is nearly complete as well.Playfield should be ready to drop into the cabinet in the next few hours.
|
67
Underside wiring is complete for now until it is further populated on the topside.
|
68
|
69
No more corroded metal.
|
70
|
71
|
72
Playfield in the cabinet.
|
74
|
75
Powered up for testing.
|
76
Lighting was added to the pop bumpers .It will now flash with activation of the coil.
|
77
Just about done.
|
78
Teal conversion.
|
79
New plastic set and window.
|
80
Wireforms done in black.
|
81
|
82
|