1
Game as it arrived.
|
2
|
3
Head has a bad joint.Looks to be a factory flaw.
|
4
|
5
|
6
|
7
Will be installing a NOS playfield.It will need a bit of work prior to use though.Main concerns are that it is not drilled no
|
8
|
9
Jet area helps highlight the lack of holes for the various parts.
|
10
|
11
|
12
Underside is not dimpled either.This means there are no marks or starting points for the many parts that need to be screwed
|
13
|
14
|
15
The tedious process of dimpling/predrilling the underside is started.
|
16
|
17
|
18
Playfield is now dimpled underneath.
|
19
Now I will drill for the third magnet that will be installed.A small pilot hole is done first.
|
20
The large hole is now made.I will properly repaint this area as well.
|
21
Jet bumper area now properly drilled.
|
22
Shooter lane is smoothed in.Has a small core /void in it that will require a little work.
|
23
Playfield is now sanded.
|
24
Shooter lane lightly repaired.Might need a little more work but the initial work is done.
|
26
Ready to clear.
|
25
Third magnet border work done to make it look as original as possible.The border is done in an offset pattern to better mim
|
27
first clear applied.
|
28
|
29
|
30
|
31
|
32
After a couple days this will be sanded and prepped for a final clear application.
|
33
New cabinet is built.Restoring the old one is more trouble than it is worth these days if you want to build the nicest gam
|
34
New head.
|
35
Head is primed.
|
36
Lower primed.
|
37
Ready to sand and prep for paint and clear.
|
38
Sanded and based in black.
|
39
Cleared.
|
40
Dried and now prepped for decals and screened.
|