81
Old plastics.
|
82
New plastics are built.
|
83
Will rework the coil assemblies now.
|
84
|
85
Flippers built with modifications to eliminate the internal conical springs but retain all other aspects of the era.
|
86
Shaker motor is torndown,polished and cleaned.
|
87
|
88
Motor rebuilt with some added protections.
|
89
Lower cabinet is decaled and braided.
|
90
|
91
All parts polished or plated as needed.New extended power cord and reinforced/updated leg plates.
|
92
|
93
Head decaled and braided.
|
94
|
95
Plated and polished parts ready to install.
|
96
Head is being built.
|
97
|
98
|
99
Rusty transformer has been thoroughly reconditioned and is now in place along with the shaker motor.
|
100
Shaker cover was thoroughly cleaned and a new decal was made for it.Thank you John!
|
101
Lower cabinet is coming together.All assemblies are worked at the same time those being the lower,head and playfield so
|
102
Ready to start t nutting and rebuilding the playfield.
|
103
T nutted sockets and braid are placed.
|
104
Ball guides and rails in place.
|
105
Reworking the coin door now.It is buckled in the center and not repairable.Cannot get a replacement so I will use and
|
106
Wiring is a bit chewed up here and there missing the slam tilt switch also.
|
107
Torn down all painted parts are correctly refinished with the factory style pattern.
|
108
Parts are dry.Some of the insert pieces etc will be replaced.
|
109
|
110
Rebuilt.Now it has the previously missing slam tilt switch.
|
111
Connector rebuilt.New ground strap with protection.
|
112
Ready to install.
|
113
Cabinet build continues.New rails installed.
|
114
|
115
|
116
|
117
Up on new System 11 correct legs.
|
118
Topside rebuild about as far as it goes without populating the underside.
|
119
|
120
|