38
|
39
Rust is present everywhere from the hinges to the bolts.
|
40
More obvious voids in the cabinet.
|
41
|
42
|
43
Even more voids in the cabinet.These hollow sections make reworking the original pointless.It isn't that it can't be done
|
44
Lamp panel is torn down.
|
45
Wiring is removed from the panel.
|
46
Panel is refinished to freshen it back up.
|
47
All p[arts removed from panel are cleaned and polished.Once dried it will be reassembled.
|
48
Speaker panel is rebuilt with nicer correct speakers,new and or polished hardware.A plastic H channel in place of the rust
|
49
|
50
The plastic panel was cleaned and polished prior to being reinstalled.
|
51
Translite is cleaned and rebuilt with new channels.
|
52
|
53
Metal panel from the head is cleaned up.
|
54
Playfield assembly is out of the cabinet now.
|
55
Trying to better highlight the amount of concave in the center of the floor.
|
56
|
57
Lower gutted.
|
58
|
59
|
60
|
61
This better shows the bow in the floor.
|
62
Head gutted.
|
63
Void in the head in a very bad spot runs all the way across.
|
64
The reason it is so bad in terms of where is because this is the anchor point for the lamp panel hinge.
|
65
Some of the trash removed thus far.
|
66
Will work through the cabinet harness to clean it up and eliminate any hacks from the topper rig.
|
67
Power box assembly will be reworked.
|
68
New cord will be needed.
|
69
These parts will require plating due to rust and corrosion heavier in some spots not as bad in others.
|
70
Will start stripping the underside of the playfield next.
|
71
|
72
|
73
|
74
|
75
|
76
|
77
|