41
|
42
|
43
Rear lip will need to be reworked also.
|
44
|
45
Repairs are coming together.
|
46
Bottom floor is sanded clean as possible.Will get a little more detail work done later.
|
47
Working the front and inner floor now.
|
48
Floor is cleaned up will also require more detail work later.
|
49
Head is stripped and repairs are being made.
|
50
Working on the playfield,parts and pieces as well.
|
51
Mechanically it is rough but nothing terrible.
|
52
We will start on polishing and rebuilding all the coils.
|
53
Examples of the mechs as they are serviced.
|
54
|
55
|
56
Playfield is stripped complete.I had hoped to rework this original since the SOL hole looked to have a acceptable amount
|
57
A full evaluation of the playfield now that it is bare and all areas are exposed.
|
58
Lower looks decent.There is some insert wear and a little raise in the Return to Battle insert itself.That is to be expe
|
59
Shooter lane is ok could potentially sand up nicely.
|
60
Ball drops on either side are intact.
|
61
More insert bordering,slight raises here and there.
|
62
the SOL hole itself is decent compared to most.The trenching and insert damage leading out of it is not,This is something
|
63
|
64
The upper portion is where my biggest concerns lie.
|
65
The drop target hole is completely blown out to a point where it is broken all the way through.This could easily be fixe
|
66
Better angle on the key issue.
|
67
|
68
Playfield is cleaned up a bit and I will continue to focus on the other aspects of the restore as we contemplate which direc
|
69
Working through some of the parts one at a time as other things like the cabinet work progress in the background.
|
70
Power box assembly will be cleaned and polished,
|
71
Power box is done and shelved until reassembly along with many other parts and wiring already gone through.
|
72
|
73
A new mother ship was needed that and the other ships have been refinished to make sure they all match and freshen up t
|
74
Saucers are all rebuilt and the LED kit is hot glued in each one so they are not fragile nor easily popped out.
|
75
Mothership assembly is gone through,cleaned and rebuilt with the new ship,a couple needed LEDs and spacers.
|
76
Back to the cabinet the repairs are complete to the head and it is ready to prime.
|
77
|
78
Lower repairs complete and ready to prime.
|
79
Cabinet is primed and guide coated.
|
80
|