80
Center inserts show bordering and typical wear.
|
81
|
82
|
83
Some average wear at the drop target hole.
|
84
Playfield is now cleaned and can be further evaluated.
|
85
Shooter lane shows some ground in dirt and light wear.
|
86
Insert edges are going to need to be repainted.
|
87
Ball drops and wood tomes will need to be refreshed.
|
88
|
89
SOL will require a moderate amount of repair and repainting.
|
90
Jet area is pretty clean now.The insert will need a new border due to the Mylar removal.
|
91
Shooter lane is sanded clean and properly shaped.
|
92
Playfield is prepped and can be moved into the paint shop for structural repairs and the beginning stages of the refin
|
93
Cabinet is refinished.
|
94
|
95
Head is screened with the correct warning text.
|
96
Playfield is being repaired and prepped for the first clear application.
|
97
Structural repairs are made.
|
98
Cleaned and ready to do some initial repaints and roughing in of the damaged art.
|
99
|
100
|
101
Some of the worst wood tone areas are refinished first just to get that in order under the first clear.
|
102
SOL area is not at all finished yet but roughed in as a blueprint for the repaints that will come later in the process.
|
103
|
104
First clear is applied.
|
105
|
106
The SOL hole and inserts leading to it will need more work as things progress but the clear will act as a way to seal i
|
107
|
108
While this cures I will get back to other aspects of the restoration.
|
109
Mothership assembly needs work.A new cover and more.
|
110
Now opened up cut/hacked wiring is found.I doubt it was working in this shape.
|
111
Cable is repaired properly.
|
112
Missing and broken LEDs around the board.
|
113
New LEDs and spacers installed as needed.
|
114
Back to the playfield.It is ready to sand and prep for the final repaints.
|
115
Sanded once again.
|
116
Inserts are now level and the borders are filled so it can be retouched as needed.
|
117
The splintering of the switch cut outs from the ball drops is now sealed with clear and can be further smoothed and worked.
|
118
Shooter lane will require a small amount of repaint/wood tone work since the ground in dirt is too deep to sand out compl
|
119
The SOL hole and insert damage will be perfected during this stage now that everything is solid and level.
|