40
|
41
This is a very tough color to match and spray.Very transparent.
|
42
Color is applied it took several coats.
|
43
|
44
The hole up top is a bit worn so that will be addressed at this time.
|
45
The carbon fiber filler is applied.
|
46
The hole is properly shaped.It will be cleared first then repainted so it has a smooth surface to repaint and everythin is
|
47
Second coat of clear is applied.
|
48
Looks much better.
|
49
This area in particular is much improved but still needs a little work.Once it is fully cured I will sand it back down for a
|
50
|
51
Cabinet is now completely stripped of all parts.
|
52
The front is the roughest part.
|
53
|
54
The head is pretty nice but it will need some fresheding up.
|
55
The repairs are underway.
|
56
|
57
Luckily most of the bumps and bruises are in the black.
|
58
Most of this will be cut back off but this will get all the large and small problems in one swipe.
|
59
|
60
Repairs are pretty much done.
|
61
|
62
Cabinet is mask to prime.The primer used is black.
|
63
|
64
Head is ready for primer as well.
|
65
Cabinet has been primed.Once fully cured it will be sanded then the black will be painte.After that it gets cleared.Sanded,
|
66
|
67
Now that the repairs are done the cabinet has been cleared to seal up and protect what is good and level what isn't.
This
|
68
Once it is cured I will sand it and repaint all the black.
The final clear will be a matte finish but right now it doesn'
|
69
|
70
|
71
Cabinet is sanded again.
|
72
|
73
Sides are masked so the black can be repainted.
|
74
|
75
Black basecoat is put down.
|
76
|
77
|
78
Just the needed sections are placed on the front.it is not an entire decal.
|
79
Cabinet is cleared again.
|