41 Sanded and ready for the next phase of restoration.
42
43
44
45 All wood tones are now done to finish pulling it all together.
46 Third clear applied.
47
48
49
50 This should put the playfield is a good spot.while it final cures I will prep a cabinet for the build.
51 New cabinet is prepped and painted.
52
53 New head prepped and painted.Both the lower and head are glossy/wet in the pictures but will die down a bit as they dry.
54 Head now dry and screened with the correct warning text. Will prep the cabinet for decals next then finish gutting the bas
55 Prepped for decals.
56
57
58 Decals applied. A tedious job on these because of the alignments. I will finish the edges out next.
59 Going to finish gutting the donor game now.
60
61
62
63 New lower edges are bing finished out and the inside art is applied.
64 Edges are finished and the cabinet is being rebuilt.
65 Playfield is sanded polished and ready for rebuild.
66
67
68
69
70
71 All metal is polished and or plated as needed.
72
73 Backboard was sanded repainted and a new decal was installed.
74 Building the underside.
75 All metal polished,all coils rebuilt.Will install new diode on the flipper coil on the right during the wiring phase.
76
77
78 All targets have been removed cleaned or replaced as needed and will be rewired with better wiring and a better layout.
79
80 Underside rebuild is complete.