1
Game as it arrived.
|
2
|
3
|
4
Back and head are quite beat up.Missing chocks as well.Does not show as obviously as it should because it has all been doctor
|
5
Tape off around the lettering on the back then latex painted around.
|
6
Head seams are cracked and there are other issues so a new head will be used.
|
7
|
8
Boards look okay no major concerns outside of the normal servicing.
|
9
|
10
Translit is cleaned and rebuilt with the correct channels.
|
11
Playfield is average at a glance.Not worth restoring since repros are readily available and well done.
|
12
|
13
Does have some insert issues and typical hole wear.
|
14
Inside there is much corrosion and metal discoloration.
|
15
Inside the cabinet is dirty and also doctored up making it a bit more trouble than the norm.
|
16
Same latex paint job was done on the inside.Worse is that they were not careful and got a good bit of paint on the wires
|
17
|
18
|
19
Paint on the wires throughout the cabinet.
|
20
|
21
Underside is also troublesome.Corrosion of course but there is more.
|
22
Wires have been cut into in a spot or two.No real damage that I can see but there are a birds nest.
|
23
Writing on all the connectors :-(
|
24
|
25
Corrosion and discoloration on most of the brackets.
|
26
|
27
|
28
|
29
Starting with the repro playfield I will make corrections where needed and get it ready to install.
|
30
All is well on this repro just need to widen the shooter lane and lengthen it a bit to make it match up to the original
|
31
Sanded as thin as possible.
|
32
Shooter lane corrected.
|
33
Ready to clear.
|
34
Cleared.
|
35
Inserts are leveling out.
|
36
Shooter lane is smoothing in.This will likely absorb into the wood as it cures so another application will be done later.
|
37
|
38
After is cures a bit I will sand and clear once more.
|
39
Sanded
|
40
Final clear applied.
|