81
The gears are filthy and gummy.
|
82
The gate is broken into pieces.
|
83
These are some of the parts needed to get it right again.Many are tougher to find so luckily I have a decent stash of the
|
84
The drive gear is stripped and will need to be replaced.
|
85
This is the trash out of the old assembly.
|
86
New drive gear is in place.All other gears were checked,cleaned and greased.
|
87
The assembly is now complete.I will change out some of the wiring later as well once I head into rebuild.
|
88
All other coil mechs are polished and rebuilt.A lot of time was needed here.
|
89
|
90
Now for the first ramp.It will need to be replaced due to entrance cracks.In the process I will rewire and configure it a b
|
91
New ramp.
|
92
Parts that are needed have been pulled from the old ramp.
|
93
New ramp is being built with new lamp sockets and better wiring.
|
94
New ramp is complete .The wiring is closed up and will hide well once back in the game.
|
95
Head is screened and prepped for decal application.
|
96
Lower prepped for decal application.
|
97
|
98
|
99
Decals applied.Will finish the edges next.
|
100
Edges are finished and the cabinet is being built with chrome trim as requested.
|
101
A/V board was returned as non repairable.No shock there given what the previous repairs look like.
|
102
New replacement board will be used.
|
103
All other boards were cleaned and serviced as needed .They are now in place.
|
104
|
105
|
106
|
107
Cabinet is about to be rewired.
|
108
Playfield has been sanded polished and t nutted.
|
109
Playfield is being built.
|
110
|
111
Apron is being repaired at the ball trough entrance area.
|
112
Repairs are refinished.
|
113
Apron is cleared.
|
114
|
115
Coin door is cleaned and refinished with the correct factory pattern.
|
116
Rebuilding the dmd panel now.I will refinish it, install a new clear indow,upgraded speakers and a color DMD.
|
117
|
118
|
119
Panel rebuilt.
|
120
|