83
Rebuilt speaker panel back.
|
84
Rebuilt front.Plastic was buffed to a high gloss and that eliminated many of the scratches as well.
|
85
All boards are servicedless the CPU which I will test first and as long as it functions properly I will leave alone sinc
|
86
All coil mechs are polished and rebuilt.
|
87
The correct flipper coils are installed as well.
|
88
The magnet poles were turned and polished.
|
89
Backboard decal is installed.Will trim it up later.
|
90
A new mini playfield is being installed.I have cleared it already.These are well made and it makes more sense at their
|
91
A close look at the original shows the planking issue.
|
92
New mini is built with the GLM switch kit and lots of other minor touches to clean up the wiring as well as bulletp
|
93
Gumballl machine will be torndown and then rebuilt.
|
94
I will keep the existing lighting mod but will change to a better version of gumballs.
|
95
The old gumballs are kind of cheap looking.I prefer glass ones for my projects typically.
|
96
Gumball machine is torn down.
|
97
All parts are cleaned and polished.
|
98
Gumball machine rebuilt with the nicer gumballs.I used a heavy concentration of yellow,green and orange to better match
|
99
The old clock face has bubbling on the decal.
|
100
A new screen printed face will be used instead of redecaling the old one.
|
101
Clock is rebuilt.I have cleaned and greased it for quieter operation.I have also reflowed the solder points on the cur
|
102
The apron has been cleaned and polished.
|
103
The ball guides are being regrained.
|
104
New stainless flaps are being installed.
|
105
The ramp has been torn down cleaned,flame polished and rebuilt.Extended wiring is in place where it is beneficial.
|
106
New stainless flap installed on the plastic ramp.
|
107
New plastic set is being built up for the game.
|
108
New plastics are beig placed as needed along with the gumball machine.This is easier to install at the beginning stages
|
109
The playfield is being rebuilt now that all parts are in order.
|
110
|
111
|
112
|
113
A new slot scoop is needed.This is the reinforced version.
|
114
Underside is being rebuilt and the game should close out in the next few days.
|
115
I will now gut the donor cabinet and go over the issues that make replacement the best choice.
|
116
Head removed.
|
117
Lower gutted of all useable parts.
|
118
The front joint is broken.This is not just the a separation of the the two pieces but an actual break in the lock mi
|
119
Previously filled holes and water stains on the front and floor portions.
|
120
Hard to justify all the sanding,filling and doctoring up of these cabinets when replacement yields better results.
|
121
Sloppy glue work at the factory leaves a lot of extra clean up .These are just a few examples of the reasoning behind
|
122
Switch harness is being placed.
|